fbpx
Home > Guides > Fix Infinite Restart Loop in PlayStation 4

PlayStation 4 Infinite Restart Loop Fix

Here's how to fix an endless restart loop on the PlayStation 4.

Sony’s PS4 is a gaming marvel that has achieved worldwide acclaim. However, no electronic system is flawless, and certain consumers may encounter issues with the device. It’s not the end of the universe if your PlayStation 4 has a problem with it repeatedly restarting and being caught in a loop. So let’s look at how to fix an endless restart loop on the PlayStation 4.

Advertisement

How to Fix Infinite Restart Loop on the Playstation 4?

There are few ways to fix an endless restart loop on the PlayStation 4, like:

  • The console should be Power Cycled
  • Ensure that the power cord is in good working order by inspecting or replacing it
  • Check that the hard drive is operational
  • Initialize to its original settings

How to Fix Infinite Restart Loop on the Playstation 4

The Console Should Be Power Cycled

First, disconnect all of the wires from the back of your console and wait for it to cool down. Allow it to sit for 10 to 15 minutes before turning it on in safe mode. By holding the power button on your PS4 for 10 seconds and then by turning it on you can trigger safe mode.

Advertisement

Ensure That the Power Cord Is Working

Make sure the insulator in the power cable has no noticeable signs of damage. Attempt to scrub the power cable of any debris, lint, or foreign objects. If you need to replace the power cord, get an original cable.

Check That the Playstation Hard Drive Is Operationalto Fix Infinite Restart Loop

You’ll need to remove the hard drive and restart the console without it. This is one of the most successful methods for determining whether or not there is a hard drive problem. If the hard drive has been disabled, try booting the console normally to see if it works. Reinstall the hard drive and search for the problem again if it boots up without a delay.

Factory Reset to Its Original Settings

Advertisement

You may also use the Initialize PS4 by reinstalling device software in safe mode to correct potential software issues. The disadvantage of doing that is that it erases all of the data stored on the console. In safe mode, go to the settings menu and select the initialize option. After that, the PS4 will be reset to its factory default settings.

That’s everything you need to know about how to fix an endless restart loop on the PlayStation 4. While you are here, check out how to easily use the DualSense PS5 Controller on PS4.

Advertisement